PlayBots

PlayBots

Usagi – 220lbs

11040302_10205160946996196_273113168_n

Matchbox 220 – 220lbs

Matchbox will be a 220lb, heavyweight class combat robot. It will be constructed with a rectangular 4140 tube steel chassis, of various sizes depending on the location, and floating 4140 steel armor (size to be determined). The Invertable tank style drive powered by two long mags (Amp-Flow A28-400 motors) triple reduction totalling 15:1 on 3/4″ drive shaft with stamped steel bearings. The drive will be controlled by four Victor 883′s and two 22.2v 5000mah 40-50C Turnigy Lipos. The weapon, a drum, will be powered by four EV Warrior motors. It will be approximately 8.5″ tall, 31″ long, and 29″ wide. See the build updates here.

Matchbox220

Carnivorous Bunny V4 – 120lb

Carnivorous is a 120lb, Middleweight class robot, constructed of angled steel, and aluminum. The drive is powered by two NPC T-64 motors, and two victor 883’s. The lifter is powered by a  6″ x 3″ pneumatic ram, with a 24oz tank. The armor is 1/4″ diamond plate aluminum.

Carnivorous Bunny

Carnivorous Bunny

 

Carnivorous Bunny V3 120lb

Carnivorous is a 120lb, Middleweight class robot, constructed of angled steel, and aluminum. The drive is powered by two EV Warrior motors, and two victor 883’s. The lifter is powered by a  9″ x 2″ pneumatic ram, with a 24oz tank. The armor is 1/4″ diamond plate aluminum.

carnivorous cbdp

Carnivorous Bunny V2 – 120lb

Carnivorous is a 120lb, Middleweight class robot, constructed of angled steel, and aluminum. The drive is powered by two EV Warriormotors, and two victor 883’s. The lifter is powered by a  9″ x 2″” pneumatic ram, with a 24oz tank. The armor is sheet steel.

LVSFVI01

Carnivorous Bunny V1 – 120lb

This beast of a robot was our first attempt at making a 120lb robot, it used two EV warriors, tube steel framing with loads and loads of armor.

LVSFV06

Mouser Mecha Cat Bot – 60lb

Mouser was built by Fon Davis for the original Battlebots Series on Comedy Central.

SMCSpin

Lil’ Shocker – 12lb

Originally built by James Arluck, Lil’ Shocker is a welcome addition to PlayBot. Constructed of aluminum, it is a simple wedge bot driven by dewalt motors, and powered with Victor 883’s and a 22.2V Turnigy Lipo.

lilshocker

 

BunnyKit  – 1lb

The antweight 1lber BunnyKit is a modified tri-wheeled RC car, powered by a single drive motor, and a hitec servo on the front to steer. It has a pushing ram made out of thin.25″ x .25″ x .08 aluminum tube.

 

Baby Bunny – 150gram

Baby Bunny is a carbon fiber & titanium 150g featherweight, with self righting ears powered by a hitec servo. It is two wheel drive with a wedge of doom powered by a 7.4v ThunderPower lipo battery.

babybunny

 

 

RoboGames2007017